Usage: gstlal_ifo_stat [options]
Options:
-h, --help show this help message and exit
--output-url=path Write to this url
--wait-time=<class 'int'>
wait time
--scald-config=file sets ligo-scald options based on yaml configuration.
--bootstrap-from-influx
If given, upon start up the previous IFO state and
duration will be read from the Influx database
provided by --scald-config. In this case the duration
measurement will pick up from the last stored value.
Default is false.
--verbose Be verbose.
Data source options:
Use these options to set up the appropriate data source
--data-source=source
Set the data source from
[frames|framexmit|lvshm|nds|silence|white]. Required.
--block-size=bytes Data block size to read in bytes. Default 16384 * 8 *
512 (512 seconds of double precision data at 16384 Hz.
This parameter is only used if --data-source is one of
white, silence, AdvVirgo, LIGO, AdvLIGO, nds.
--frame-cache=filename
Set the name of the LAL cache listing the LIGO-Virgo
.gwf frame files (optional).
--frame-type=name Set the frame type for a given instrument. Can be
given multiple times as --frame-type=IFO=FRAME-TYPE.
Used with --data-source=frames
--data-find-server=url
Set the data find server for LIGO data discovery. Used
with --data-source=frames
--gps-start-time=seconds
Set the start time of the segment to analyze in GPS
seconds. Required unless --data-source=lvshm
--gps-end-time=seconds
Set the end time of the segment to analyze in GPS
seconds. Required unless --data-source=lvshm
--injection-file=filename
Set the name of the LIGO light-weight XML file from
which to load injections (optional).
--channel-name=name
Set the name of the channels to process. Can be given
multiple times as --channel-name=IFO=CHANNEL-NAME
--idq-channel-name=idqname
iDQ channel names to process. Must also provide idq-
state-channel-name. Can be given multiple times as
--idq-channel-name=IFO=IDQ-CHANNEL-NAME
--idq-state-channel-name=idqstatename
iDQ state channel names to process. Can be given
multiple times as --idq-state-channel-name=IFO=IDQ-
STATE-CHANNEL-NAME
--nds-host=hostname
Set the remote host or IP address that serves nds
data. This is required iff --data-source=nds
--nds-port=portnumber
Set the port of the remote host that serves nds data.
This is required iff --data-source=nds
--nds-channel-type=type
Set the port of the remote host that serves nds data.
This is required only if --data-source=nds.
default==online
--framexmit-addr=name
Set the address of the framexmit service. Can be
given multiple times as --framexmit-
addr=IFO=xxx.xxx.xxx.xxx:port
--framexmit-iface=name
Set the multicast interface address of the framexmit
service.
--state-channel-name=name
Set the name of the state vector channel. This
channel will be used to control the flow of data via
the on/off bits. Can be given multiple times as
--channel-name=IFO=CHANNEL-NAME
--dq-channel-name=name
Set the name of the data quality channel. This
channel will be used to control the flow of data via
the on/off bits. Can be given multiple times as
--channel-name=IFO=CHANNEL-NAME
--shared-memory-partition=name
Set the name of the shared memory partition for a
given instrument. Can be given multiple times as
--shared-memory-partition=IFO=PARTITION-NAME
--shared-memory-dir=name
Set the name of the shared memory directory for a
given instrument. Can be given multiple times as
--shared-memory-dir=IFO=DIR-NAME
--shared-memory-assumed-duration=SHARED_MEMORY_ASSUMED_DURATION
Set the assumed span of files in seconds. Default = 4.
--shared-memory-block-size=SHARED_MEMORY_BLOCK_SIZE
Set the byte size to read per buffer. Default = 4096.
--frame-segments-file=filename
Set the name of the LIGO light-weight XML file from
which to load frame segments. Optional iff --data-
source=frames
--frame-segments-name=name
Set the name of the segments to extract from the
segment tables. Required iff --frame-segments-file is
given
--state-vector-on-bits=bits
Set the state vector on bits to process (optional).
The default is 0x7 for all detectors. Override with
IFO=bits can be given multiple times. Only currently
has meaning for online (lvshm) data.
--state-vector-off-bits=bits
Set the state vector off bits to process (optional).
The default is 0x160 for all detectors. Override with
IFO=bits can be given multiple times. Only currently
has meaning for online (lvshm) data.
--dq-vector-on-bits=bits
Set the DQ vector on bits to process (optional). The
default is 0x7 for all detectors. Override with
IFO=bits can be given multiple times. Only currently
has meaning for online (lvshm) data.
--dq-vector-off-bits=bits
Set the DQ vector off bits to process (optional). The
default is 0x160 for all detectors. Override with
IFO=bits can be given multiple times. Only currently
has meaning for online (lvshm) data.