gstlal_inspiral_svd_bank¶
This program will create svd bank files; see gstlal_svd_bank for more information
Usage examples¶
Typical use:
gstlal_svd_bank --reference-psd reference_psd.xml --samples-min 1024 \ --bank-id 0 --ortho-gate-fap 0.5 --flow 40.0 \ --template-bank /mnt/qfs3/gstlalcbc/engineering/5/bns_bank_40Hz/0000-H1_split_bank-H1-TMPLTBANK-871147516-2048.xml \ --svd-tolerance 0.9995 --write-svd-bank /mnt/qfs3/gstlalcbc/engineering/5/bns_bank_40Hz/svd_0000-H1_split_bank-H1-TMPLTBANK-871147516-2048.xml \ --samples-max-64 4096 --clipleft 0 --autocorrelation-length 351 --samples-max-256 1024 --clipright 20 --samples-max 4096
Please add more!
Review Status¶
Names |
Hash |
Date |
---|---|---|
Florent, Sathya, Duncan Me., Jolien, Kipp, Chad |
7536db9d496be9a014559f4e273e1e856047bf71 |
2014-04-30 |
Command line options¶
Usage: gstlal_inspiral_svd_bank [options]
Build time-sliced, SVD'd filter banks for use with gstlal_inspiral
Options:
-h, --help show this help message and exit
--flow=Hz Set the template low-frequency cut-off (default =
40.0).
--sample-rate=Hz Set the sample rate. If not set, the sample rate will
be based on the template frequency. The sample rate
must be at least twice the highest frequency in the
templates. If provided it must be a power of two
--append-time-reversed-template
A shortcut for appending time reversed template bank
to the output file without manually adding --bank-
type. (optional; cannot combined with --bank-type.)
--bank-type=N Define the type of the template bank: is it used to
produce signal candidates or it is used to produce
noise candidate? Use 'noise_model' to indicate that
it's for noise candidates or 'signal_model' to
indicate for signal candidates (default). (optional;
if provided, it must be as many as --template-bank).
--padding=pad Fractional amount to pad time slices.
--svd-tolerance=match
Set the SVD reconstruction tolerance (default =
0.9999).
--reference-psd=filename
Load the spectrum from this LIGO light-weight XML file
(required).
--instrument-override=ifo
Override the ifo column of the single inspiral tables
--template-bank-cache=filename
Provide a cache file with the names of the LIGO light-
weight XML file from which to load the template bank.
--ortho-gate-fap=probability
Set the orthogonal SNR projection gate false-alarm
probability (default = 0.5).
--write-svd-bank=filename
Set the filename in which to save the template bank
(required).
-v, --verbose Be verbose (optional).
--autocorrelation-length=AUTOCORRELATION_LENGTH
The minimum number of samples to use for auto-
chisquared, default 201 should be odd
--samples-min=SAMPLES_MIN
The minimum number of samples to use for time slices
default 1024
--samples-max-256=SAMPLES_MAX_256
The maximum number of samples to use for time slices
with frequencies above 256Hz, default 1024
--samples-max-64=SAMPLES_MAX_64
The maximum number of samples to use for time slices
with frequencies between 64Hz and 256 Hz, default 2048
--samples-max=SAMPLES_MAX
The maximum number of samples to use for time slices
with frequencies below 64Hz, default 4096
--max-duration=s The maximum time duration for the waveform to be
searched instead of the minimum frequency